The rest of the image is normal. Set the scanner lock to the unlocked position to resolve. Mostly these codes happen when updating firmware. The Machine should make a long beep and come to ready. The tray lift motor and set sensor have been replaced and the supply voltages have been checked. Enter the Tech Rep mode:

Uploader: Kajizragore
Date Added: 16 December 2005
File Size: 69.56 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 39849
Price: Free* [*Free Regsitration Required]

From a command prompt type: All major printer manufacturers make printers that contain or can be loaded with Postscript software, which also runs on all major operating system platforms. The machine can only display the copy count down on the LCD without the hard disk drive installed. Solution This model does not support routing based ;ostscript sub addressing. Check the phone line for any noise; try connecting the machine to another phone line.

Minolta Dif | Di :: Di :: – Detailed Copier Specifications

Solution The separate scan function only works for originals scanned to copy. The latest version of firmware, system software or print postscipt is available via the Konica Minolta Download Selector.

Grease is applied to the drive gears in order to reduce the acrostic noise. Touch the “Exit” button when complete. The di3510ff driver or PageScope light does not provide functionality for performing reprints. Since this solution was written, a more recent update may be available. Press Stop, then 9. Press the Fax Program key. It was developed by Adobe in and has become an industry standard for printing and imaging.


Universal Print Driver For Administrator | KONICA MINOLTA

Replace the PWB Assembly if deemed necessary. Internal prints are OK. Copy the solution ID number into the Knowledgebase look-up Keyword field and select Search to access the solution complete with active links to attached documents. It should be zeroed out. Solution The soft counters cannot be programmed.

Solution To print Service Call Report, perform the following: Version updating is done by launching the UPDSetup. Worn friction plate sheet in the paper tray.

Do you support Printer Driver Isolation? Cat-6 features more stringent specifications for crosstalk and system noise.


Please make sure that the PostScript firmware is being used on the machine because the PostScript option chip is not enough. Exposure lamp ri3510f terminals cracking or shorting to the scanner frame.

The machine keeps rebooting. Borders and frames around icons and panes within the driver UI may not show up correctly. When renamed, the files are self-extracting.


The document feeder manual lists this adjustment to correct document skew so ensure that the documents do not skew after changing this adjustment. Checking for Internet security software that may be blocking Web access and disabling the service. The actuator that is used for detecting the home position of the manual feed tray bypass tray stops at the wrong position due to incorrect adjustment of the clutch spring and ratchet.

Konica Minolta Di3510 – Printers and MFPs specifications.

Adjust the spring clutch and ratchet according to the procedure outlined in attached Bulletin Number Replace SU-2 Item Set “E-mail Address” 8.

See Bulletin Number for details. Once the screws ;ostscript removed, the unit will come out through the front of the machine.